Las principales líneas de productos
2 Luglio, 2014
Kit Barniz bicomponente en acabado Mate en frasco con Atomizador
lang_en 2k polyurethane Lacquer "NEXTCOLOR" with Spray Gun in Matt finish: it is the complete spray kit to protect your car or motorbike bodywork paint with a layer of 2k lacquer.
This amazing item includes one 100 ml pot of 2k Lacquer (100 ml are equal to one 400 ml spray can) , one pot of its catalyst, one measuring small glass and one SPRAY GUN. This combination is ideal to protect any paints in a professional way, particularly bodywork paints: it is a catalyzed lacquer, very resistant to alcohol, petrol and partially even to the solvents. The separated containers (lacquer and catalyst) must be combined only at the moment of use: the length of the mixture is about 2 hours (at 20°C).
PREPARATION AND USE: prepare the quantity of the mixture you need, mixing 1 part of lacquer and 0.30 part of catalyst (ratio 3:1). To use it with gun or with our Spray Gun, dilute the mixture with polyurethane thinner, like our POLI60. Look at the Technical Details below for information about the quantities. It is recommended a spray test before beginning to spray paint. Spray at 20-25 cm distance. Spray a coat of paint crossing both in horizontal and vertical way. If necessary, spray again after 5-15 minutes (always when the paint is not completely dry).
The coverage of 100 ml of varnish with thinner is about 1.5-2.50 mq.
- dry dust free (at 20°C and 60% RH) 15-20 min
- dry to the touch (at 20°C and 60% RH) 30-60 min
- dry in depth (at 20°C and 60% RH) 48 hours.
NOTE: For more details about Spray Gun - small painting equipment . It works as a normal painting gun, very easy to use. After having cleaned it with nitro solvent, it can be used again several times. Remember: with one propellant sprayer, you can spread up to 500 ml of paint.
TO REMOVE THE TWO- COMPONENT LACQUER (before the complete drying) USE ACETONE AND/OR NITRO THINNER.
Código de Producto: Kit-2-2k-100OP
Cat: Barnices Transparentes bicomponentes y monocomponentes
4.5 - 15 reviews
Formato:Frasco de vidrio con catalizador y Spray Gun
Ver Productos relacionados
P&B sas - EMPOLI (FI) - Tel. (+39) 0571.530262 Fax (+39) 0571.534056 - P.IVA IT 12908320158